Pocket PC's paint mods

Asus P535, HP iPAQ hx4700 and HTC Blueangel (Qtek 9090) custom paint jobs, from 4pda.ru users :)

Motorola MPx200 bass mod

If you have a MPx200, should to know that the sound with headphones is not pretty good, the bass is missing and the volume power is not much. Here I have a mod solution that makes the phone sounds better then MP3 player :)



What you need:

1. Torx T5 screwdriver
2. Old IDE cable
3. Insulating tape
4. Soldering-iron
5. Two capacitors 100 or 470 mf

Read full story here:
http://pockethacks.com/motorola-mpx200-bass-mod/

Boost WiFi signal on your Pocket PC

Here I show you how to enhance a little bit more WiFi signal with this one easy to do modification (depends on device).



What you need:

1. Torx T6 screwdriver (or different, depens on device type)
2. Old phone with internal antenna
3. Little piece of wire
4. Insulating tape

Read full story here:
http://pockethacks.com/boost-wifi-signal-on-your-pocket-pc/

Home made docking station for Wizard

I founded this interesting mod tutorial on pdaclub.pl, and the author is xprimo. The main idea here - you don't want to spend much money for docking station for your pocket pc? Yes, me too, here we have an old Alcatel docking station ready for mod.



Read full story here:
http://pockethacks.com/home-made-docking-station-for-htc-wizard-qtek-9100/

How to fix stylus slot problem with Qtek 9000 (HTC Universal)

Main problem: the stylus slot is becoming not tighten enough to retain the stylus, and it slipped out by itself, here I have a solution.



What you need:

1. Torx T6 screwdriver
2. Super glue
3. Piece of paper
4. Toothpick

Read full story here:
http://pockethacks.com/how-to-fix-stylus-slot-problem-with-htc-universal-qtek-9000/

Dell Axim X51V - VGA, RS232, USB hub, car charger, audio preamp

Mod for a Dell Axim PDA, it includes: VGA out, Serial port with circuit for TTL to RS232 signals conversion, car charger, input for 5v Dell power supply (includes protection against connecting 12v and 5v at a time), PDA USB client connector, USB HUB x4 (powered when applying 5v or 12v), audio preamplifier with double format output (RCA and mini-jack connectors).

Read full story here.

Mod an NES Pad to work with a Pocket PC

I use my Pocket PC quite a bit for games, mainly old NES titles on the PocketNester emulator. But the hardware buttons on the iPAQ are too small, and it can be hard to use certain combinations. My solution for this was to interface an original Nintendo controller to my PPC.

Read full story here:
http://pockethacks.com/mod-an-nes-pad-to-work-with-a-pocket-pc/

Original source: http://oscar.solarbotics.net/nespad.html